Toothbrush Handle - Philips Colgate SonicPro Manual

Cleaning

Toothbrush handle

Kids. The toothbrush comes with the EasyStart feature
activated.
Note: Each of the first 14 brushings must be at least 1
minute in length to properly advance through the
EasyStart ramp-up cycle.
Activating or deactivating the EasyStart feature
- Place the handle on the charger.
- To activate EasyStart: Press and hold the power
on/off button for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been
activated.
- To deactivate EasyStart: Press and hold the power
on/off button for 2 seconds. You hear 1 beep to
indicate that the Easy-start feature has been
deactivated.
Note: Using the EasyStart feature beyond the initial
ramp-up period is not recommended and reduces
Philips Colgate SonicPro for Kids effectiveness in
removing plaque.
You should clean your Philips Colgate SonicPro for
Kids regularly to remove toothpaste and other
residue. Failure to clean your toothbrush may result in
an unhygienic product and damage to it may occur.
Warning: Do not clean brush heads, the handle or
the charger in the dishwasher.
Warning: Do not clean with boiling hot water.
Remove the brush head from the handle and rinse
1
the metal shaft area with warm water. Make sure
you remove any residual toothpaste.
Caution: Do not push on the rubber seal at the top
of the handle with sharp objects, as this may
cause damage.
2 Wipe the entire surface of the handle with a damp
cloth.
15
English