Brushing Modes; Battery Status And Charging - Philips Colgate SonicPro Manual

Brushing modes

Battery status and charging

Charging your Philips Colgate SonicPro for Kids
7 After you have completed the brushing cycle, you
can spend additional time brushing the chewing
surfaces of your teeth and areas where staining
occurs. You can also brush your tongue, with the
toothbrush turned on or off, as you prefer.
Note: When the Philips Colgate SonicPro for Kids is
used in clinical studies, the handle should be fully
changed and the EasyStart feature deactivated.
Your Philips Colgate SonicPro for Kids is safe to
use on:
- Braces (brush heads wear out sooner when used
on braces).
- Dental restorations (fillings, crowns, veneers).
The Philips Colgate SonicPro for Kids automatically
starts in the default high mode.
- Press the brushing mode button to toggle between
modes when the toothbrush is off.
The green mode light indicates the selected mode.
- High mode: Full-strength mode designed for
older/independent brushers.
- Low mode: Reduced power mode used for
training and introducing younger children to the
sonic experience.
Plug the charger into an electrical outlet.
1
2 Place the handle on the charger.
- The battery charge indicator in the power
on/off button flashes and the handle beeps
twice to indicate that the toothbrush is
charging.
- When the toothbrush is fully charged, the
battery charge indicator stops flashing and
remains on.
Note: If the battery charge of the Philips Colgate
SonicPro for Kids is low, you hear 3 beeps and the
13
English