Philips Colgate SonicPro Manual page 12

12
English
1
2
4
3
With the attached brush head, wet the bristles and
1
apply a small amount of toothpaste.
Note: Use no more than a pea sized amount of
toothpaste and spit out excess toothpaste after
brushing.
2 Place the toothbrush bristles against the teeth at a
slight angle (45 degrees), pressing firmly to make
the bristles reach the gumline or slightly beneath
the gumline.
Note: Keep the center of the brush in contact with
the teeth at all times.
3 Press the power on/off button to turn on the
toothbrush.
4 Gently keep the bristles placed on the teeth and in
the gumline. Brush your teeth with small back and
forth motion so the bristles reach between the
teeth. Continue this motion throughout your
brushing cycle.
Note: The bristles should slightly flare. It is not
recommended to scrub as you would with a
manual toothbrush.
5 To clean the inside surfaces of the front teeth, tilt
the brush handle semi-upright and make several
vertical overlapping brushing strokes on each
tooth.
Note: To make sure you brush evenly throughout
the mouth, divide your mouth into 4 sections using
the KidPacer feature.
6 Begin brushing in section 1 (outside upper teeth)
and brush for 30 seconds before you move to
section 2 (inside upper teeth). Continue brushing in
section 3 (outside lower teeth) and brush for 30
seconds before you move to section 4 (inside
lower teeth).