Get Started; Install Batteries; Connect Power; Set Time - Philips 3000 Series User Manual

3

Get started

Always follow the instructions in this chapter in
sequence.

Install batteries

The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
sunshine or re. Never discard batteries in re.
•
Batteries contain chemical substances, so they should
be disposed of properly.
•
Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the set.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.

Connect power

Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the
back or underside of the clock radio.
•
Risk of electrical shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
4 EN
Note
•
The type plate is located at the bottom of the clock
radio.
Connect the power adaptor to the wall outlet.

Set time

Note
•
You can only set time in standby mode.
1
In standby mode, press and hold
for 2 seconds.
2 HR
Press to set hour and
minute, then press
The time is set.
SET TIME
MIN
to set
SET TIME
to con rm.