Other Features; Set Alarm Time; Set Sleep Timer; Adjust Display Brightness - Philips 3000 Series User Manual

5

Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
AL2
for 2 seconds to set alarm time.
2 HR
Press to set hour and
minute, then press
Tip
•
The unit exits alarm setting mode when being idle for
10 seconds.
Select alarm source
You can select FM radio or buzzer as the alarm
AL1
source by pressing
mode.
The corresponding alarm icon lights up.
Activate/deactivate alarm timer
AL1 AL2
Press or repeatedly to activate or
deactivate the alarm timer.
If the alarm timer is activated, the alarm
indicator turns on.
If the alarm timer is deactivated, the alarm
indicator turns o .
6 EN
AL1
or
MIN
to set
AL1 AL2
or to con rm.
AL2
or in standby
The alarm repeats ringing for the next day.
To stop the alarm, press the coresponding
or .
AL1 AL2
Snooze the alarm
When the alarm sounds, press
The alarm snoozes and repeats ringing 9
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
•
SLEEP
Press repeatedly to select a period
(in minutes).
The clock radio switches to standby mode
automatically after the preset period.
To deactivate the sleep timer:
•
SLEEP
Press repeatedly until [ OFF ] (o )
appears.

Adjust display brightness

BRIGHTNESS
Press
di erent brightness levels:
•
High
•
Medium
•
Low
.
SNOOZE
repeatedly to select