Table of Contents
Advertisement
16 / 74
Important directions on use
Meaning of symbols
Table 3: Meaning of symbols
Symbol
Meaning
Reference to supplementary docu-
mentation
Explosion protection identification
The UL Recognized Component
Mark identifies recognized compo-
nent parts which are components
of a bigger product or system.
The letters "C" and "E" stand for
"Conformité Européenne". The CE-
marking expresses the conformity
of a product with relevant EC-regu-
lations.
SI
Components for the use in systems
for "integrated safety technique"
prepared.
The symbol indicating "separate
collection" for all batteries and
accumulators is the crossed-out
wheeled bin.
Markup
The following markups are used for a user-
friendly text information representation:
Reference to supplementary documentation
Remark: This note gives important informa-
tion, which must be observed.
•
Listings on the first level contain a bullet
point
–
Listings on the second level contain a
dash
Instruction
Instruction
�� Result of one instruction
Bosch Rexroth AG
MKE Synchronous Servomotors
Instruction multilevel
1.
Action step one
2.
Action step two
�� Result of an instruction
Please comply with the order of the handling
instructions.
2
Safety instructions
Observe the general safety notes in this chapter
and the safety instructions in this documentation.
Therewith, you avoid personal danger, damage
and errors.
Remark: This operating instruction must be
stored and transferred in case of sale during the
complete product lifetime.
2.1
Important directions on
use
2.1.1
Intended use
Prerequisites for proper and safe use of the
motors are proper transport, appropriate
storage, proper assembly and connection,
careful maintenance, operation and overhaul.
The motors are suited for proper use in haz-
ardous areas according to ATEX Directive
2014/34/EU.
The motors have been designed for installation in
industrial machinery. The motors are according to
the following standards.
Standards
EN IEC
Potentially explosive areas – Part 0: Equip-
60079-0
ment – General requirements
EN 60079-1 Explosive atmospheres - Part 1: Equipment
protection by flameproof enclosures "d"
EN 60079-31 Potentially explosive atmosphere – Part 31:
Equipment dust ignition protection by enclo-
sure "t"
The machine manufacturer must evaluate the
electric and mechanic safety as well as environ-
mental influences in the assembled state of the
R911402016, Edition 02
Advertisement
Table of Contents
