Safety Instructions - Bosch rexroth MS2N03-A Operating Manual

10 / 72
Safety sym- Meaning
bols
Prohibited for persons with
active implantable medical devices
(AIMD) or passive metallic implants
(body aids) as well as for pregnant
women
Do not carry along metal parts or
clocks.
Hammer scales are forbidden
Meaning of symbols
Table 3: Meaning of symbols
Symbol Meaning
Reference to supplementary docu-
mentation
The UL Recognized Component
Mark identifies recognized compo-
nent parts which are components
of a bigger product or system.
The letters "C" and "E" stand for
"Conformité Européenne". The CE-
marking expresses the conformity
of a product with relevant EC-regu-
lations.
Components for the use in systems
for "integrated safety technique"
prepared.
The symbol indicating "separate
collection" for all batteries and
accumulators is the crossed-out
wheeled bin.
Markup
The following markups are used for a user-
friendly text information representation:
Remark: This note gives important informa-
tion, which must be observed.
Bosch Rexroth AG
•
Listings on the first level contain a bullet
point
–
Listings on the second level contain a
dash
Instruction
Instruction
�� Result of one instruction
Instruction multilevel
1. Action step one
2. Action step two
�� Result of an instruction
Please comply with the order of the handling
instructions.
Trademark information
HIPERFACE® is a registered trademark of Sick AG
79183 Waldkirch, Germany
EnDat® is a registered trademark of the Dr.
Johannes Heidenhain GmbH 83301 Traunreut,
Germany
ACURO®link is a registered trademark of Hengs-
tler GmbH 78554 Aldingen, Germany
SPEEDCON® is a registered trademark of
PHOENIX CONTACT GmbH & Co. KG 32825
Blomberg, Germany
SpeedTec® is a registered trademark of TE Con-
nectivity Industrial GmbH 94559 Niederwinkling,
Germany
2

Safety instructions

Observe the general safety notes in this chapter
and the safety instructions in this documentation.
Therewith, you avoid personal danger, damage
and errors.
Keep this instructions!
This operating instruction must be stored and
transferred in case of sale during the complete
product lifetime.
MS2N
R911347581, Edition 05