Jensen JWM10A Quick Reference Manual

POWER/MODE: Push to turn on.
Press to cycle through sources.
Press & hold to turn OFF and
enter standby mode.
AUDIO/SETTINGS: Press to
bring up AUDIO ADJUSTMENT
options: BASS, TREBLE, &
BALANCE (left to right).
Press & hold to bring up SETTING
MENU options: BLUETOOTH
(ON/OFF), BEEP, ADJUST LCD
BRIGHTNESS, PRESET
VOLUME and RESET. Press
VOLUME UP/DOWN buttons will
adjust each SETTING option
except 'RESET'.
AUX IN: Insert 3.5mm cable from
your portable media device.
App download and operation:
jControl app controls all of
the primary fu nctions of the
JWM10A directly from your
phone or tablet. It can be
searching for
found by
"JENSEN jControl".
After downloading and installing app, pair
your device to the JWM10A as instructed
in "Bluetooth Operation" section in this
guide. Once your device is paired, open
the app and use as instructed. (Device
must be paired to JWM10A before
opening and using app).
VOLUME: Press the VOLUME UP
(M)button to increase volume
or Press the VOLUME DOWN
(H) button to decrease volume.
MODE: Press repeatedly until you
reach TUNER mode displayed as
a frequency.
AS/PS: Press to SCAN through
currently stored presets. Press &
hole to STORE strongest broad-
cast stations in your area.
BAND:
BANDS (AM1, AM2) & three FM
BANDS(FM1,FM2,FM3).
BACK: Press to exit any menu.
Tablet Interface
Mode Menu
Zone Volume
and Settings
Power
App Info
Press to select between two AM
JWM10A
QUICK REFERENCE GUIDE
RESET: Use a ball point pen or
thin metal object to press the
reser buttons.
Back Play/Pause/Mute
STATION STORE PRESETS:
Press & hole to store current
station. Press once to recall stored
channel.
NOTE: Up to 18 FM & 12 AM
channels can be stored.
VOLUME: Press the VOLUME UP
button to increase volume or Press the
VOLUME DOWN (H) button to
decrease volume.
ZONES OUTPUT: Press any zone button
(ZONE A and ZONE B) to control
corresponding speaker output from the
radio, SPK A, SPK B will appear on the
display.
Forward Volume Control
MUTE: Press to MUTE volume.
Press again to resume volume.
TUNE/SEEK/TRACK: Press >> |
button to tune frequency higher.
Press << button to tune frequency |
lower. Press and hold to scan to
next strongest station.
(M)