Download Print this page
Jensen VX4022A Installation Manual
Hide thumbs Also See for VX4022A:

Advertisement

Quick Links

What's in the Box
The following items are supplied
with the VX4022A:
VX4022A Head Unit
Trim Rings
Hardware Bag
Power/Speaker Output Harness
Remote Control
External Microphone
Mounting Sleeve / Side Brackets
Installation Guide / Warranty
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
VX4022A
The following tools and supplies
are needed to install the VX4022A:
screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
Installation Guide

Tools and Supplies

at-head and Philips

Advertisement

loading

Summary of Contents for Jensen VX4022A

  • Page 1: Tools And Supplies

    Installation Guide VX4022A What’s in the Box Tools and Supplies The following items are supplied The following tools and supplies with the VX4022A: are needed to install the VX4022A: • VX4022A Head Unit at-head and Philips • Trim Rings screwdrivers •...
  • Page 2: Optional Equipment

    (-) battery cable prior to installation. NOTE: If the VX4022A is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.
  • Page 3: Wiring Diagram

    Wiring Diagram CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. HDMI Black SiriusXM Black Black...
  • Page 4 2602 Marina Drive, Elkhart, IN 46514 WWW.ASAELECTRONICS.COM © 2015 Printed in China...