Table of Contents
Advertisement
12 SERVICE WORK ON THE CHASSIS
12.33
78
H03705-11
S03562-11
Checking for chain dirt accumulation
400678-01
(FE EU)
–
Position the horn with the horn bracket.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
3
Plug in connector
for the fuel pump.
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
p. 157)
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Install the right side cover. (
–
Mount the seat. (
p. 67)
–
Install the air filter box cover. (
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
2
.
M6
10 Nm (7.4 lbf ft)
4
.
p. 71)
p. 68)
p. 79)
Advertisement
Table of Contents
