Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS 12
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Mount the clutch line with cable holder
S03552-11
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjuster). The compression damping is located in
left fork leg COMP (white adjuster).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
H01672-10
must be flush with the upper edge of the upper triple
clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S03575-11
–
Tighten screw
Guideline
Screw, top steering
head
–
Insert the fuel tank breather hose into the steering head
screw.
S03553-11
–
Mount and tighten screw
Guideline
Screw, top
steering stem
S03553-10
4
, but do not tighten yet.
5
6
are positioned toward the front.
7
.
M8
15 Nm (11.1 lbf ft)
4
.
M20x1.5
12 Nm (8.9 lbf ft)
8
.
M8
17 Nm (12.5 lbf ft)
.
®
Loctite
243™
59
Advertisement
Table of Contents
