Closing The Fuel Tank Filler Cap; Cold Start Button - Husqvarna FE 350 2021 Owner's Manual

6 CONTROLS
6.15
6.16
22

Closing the fuel tank filler cap

S03547-10

Cold start button

S03548-10
–
Mount fuel tank filler cap and turn it clockwise until the
1
release button engages.
Info
Route fuel tank breather hose
1
The cold start button is fitted to the bottom of the throttle
valve body.
The electronic fuel injection system extends the injection time if
the engine is cold and the ambient temperature is low. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
The cold start button is activated – The cold start button is
•
pushed in all the way.
The cold start button is deactivated – The cold start button
•
is in its basic position.
2
without kinks.