5: Monitor Parameters; Hourmeters Menu - Curtis 3301T Manual

Return to TOC
The Monitor menu contains read-only parameters that indicate real-time data. You can use this data
when you are configuring or troubleshooting the application.
Note: For descriptions of the columns in this chapter's parameter description tables, see
Programmable

HOURMETERS MENU

The following table describes the parameters on the Hourmeters menu.
PARAMETER
CAN INDEX
Hourmeter 1
0x6800:00
Hourmeter 2
0x6801:00
Hourmeter 3
0x6802:00
Hourmeter 4
0x6809:00
5 — MONITOR PARAMETERS
5 — MONITOR PARAMETERS
HOURMETERS MENU.........................
— Hourmeter 1
— Hourmeter 2
— Hourmeter 3
— Hourmeter 4
MAINTENANCE MENU........................
— Maintenance 1
— Maintenance 2
— Maintenance 3
ODOMETERS MENU...........................
— Odometer 1
— Odometer 2
— Odometer 3
Parameters. The parameter descriptions do not include the Default Value column.
VALUES
RAW VALUES
0–99999.9 hours
0–999999
0–99999.9 hours
0–999999
0–99999.9 hours
0–999999
0–99999.9 hours
0–999999
Curtis Model 3301T Digital Instrumentation – September 2021
p. 43 SENDERS MENU................................
— Sender 1
— Sender 2
— Sender 3
— Sender 4
OUTPUT MENU..................................
p. 44
— PWM Duty
— Current
TEMPERATURE MENU........................
p. 44 — Internal Temperature
HOURMETERS MENU
DATA SIZE ACCESS LEVEL
32-bit Field
Intermediate
32-bit Field
Intermediate
32-bit Field
Intermediate
32-bit Field
Intermediate
p. 44
p. 45
p. 45
DESCRIPTION
Indicates how many hours are on the keyswitch
hour meter.
Indicates how many hours are on the traction
controller hour meter.
Indicates how many hours are on the pump
controller hour meter.
Indicates how many hours are on the steering
controller hour meter.
pg. 43