3: Installation And Wiring; Installing The 3301T; Figure 6 Mounting Dimensions - Curtis 3301T Manual

Curtis Model 3301T Digital Instrumentation – September 2021
This chapter explains how to install and wire the 3301T.

INSTALLING THE 3301T

Install the 3301T in a location that will keep the device clean and dry. The recommended panel cutout
is 74.3 + 0.8/–0 × 125.3 + 0.8/–0 mm, with a panel thickness between 2.0–4.0 mm.
Figure 6
Mounting
Dimensions
pg. 22
3 — INSTALLATION AND WIRING
80 ±1
74 ±0.3
136 ±1
125 ±0.3
Return to TOC
4X R8
4.2 ±0.3
36.5 ±1
47.2 ±1
4X R5.5
3 — INSTALLATION AND WIRING