Table of Contents
Advertisement
Curtis Model 3301T Digital Instrumentation – September 2021
OUTPUT MENU
The Output Mode parameter specifies how pin 8 (Switch Input5/MOSFET OUTPUT) is used. The
Driver Output Setting parameter and the parameters on the following submenus apply when the
pin is used as a driver:
• Ramp
• Initial
• Current Limit
• Dither
• PI
PARAMETER
CAN INDEX
Output Mode
0x6620:00
Driver Output Setting
0x66F0:00
Ramp Menu
The following table describes the parameters on the Ramp menu.
PARAMETER
CAN INDEX
Ramp Up Time
0x6650:00
Ramp Down Time
0x6660:00
pg. 40
OUTPUT MENU
VALUES
RAW VALUES
DATA SIZE
Enumerated
16-bit
0–5
0.0–100.0%
16-bit
0–1000
RAMP MENU
VALUES
RAW VALUES
DATA SIZE
0–10000ms
16-bit
0–10000
0–10000ms
16-bit
0–10000
ACCESS LEVEL
DEFAULT VALUE
OEM Dealer
Specifies the function for pin 8:
4
0 = Turn Off.
1 = PWM Mode.
2 = Voltage Mode.
3 = Current Mode.
4 = Lift Lock Mode.
5 = Switch Input Mode.
OEM Dealer
Specifies the output when pin 8 is used as a driver.
How the parameter is used depends upon the
0.0%
Output Mode:
• PWM mode: The actual duty cycle.
• Voltage mode: The product of this value and
the
Nominal Voltage
output voltage.
• Current mode: The product of this value and
the
Maximum Current
output current.
ACCESS LEVEL
DEFAULT VALUE
OEM Dealer
Specifies the time it takes to go from minimum to
maximum output current.
8ms
OEM Dealer
Specifies the time it takes to go from maximum to
minimum output current.
8ms
4 — PROGRAMMABLE PARAMETERS
Return to TOC
DESCRIPTION
parameter is the actual
parameter is the actual
DESCRIPTION
Advertisement
Table of Contents
