Mitsubishi Electric VL-250CZPVU-R-E Installation Manual page 26

6.4.3.4 Adjust the fan output of the product
Airflow
Airflow adjusting
Normal
Medium Skipped
Boost
Purge 100 % / 100 %
6.4.3.5 Output settings for other fan speeds
Airflow
Supply / Extract
Normal 40
Medium Skipped
Boost 70 % /
Purge 100 % / 100 %
Confirm: Speed select:
Cursor
F1 F2
6.4.3.6 Saving the settings
Airflow
Supply / Extract
Normal 40 % /
Medium Skipped
Boost 70 % /
Purge 100 % / 100 %
Speed select:
Cursor
F1 F2
40 % / 40 %
70 % / 70 %
% / 40 %
70 %
Adjust
F3 F4
40 %
70 %
F3 F4
The product starts adjusting the fan output.
[Airflow adjusting] is displayed.
After completing the output adjustment of the fan on the
product, it returns to the screen of 6.4.3.3.
Note
- Measure the air volume after Airflow adjusting has
disappeared.
If readjustment is needed for the output of the same fan
speed, repeat 6.4.3.3-6.4.3.4.
Press to return to 6.4.3.2 Fan speed selection.
Select other fan speed at 6.4.3.2.
Reperform 6.4.3.3-6.4.3.4
Note
- The fan speed icons below indicate the level of air volume.
Make sure to set the product so that the output of the fan
speed and the indication of the icon are the same.
Normal Medium
<
Press to return to 6.4.3.2 Fan speed selection.
When or is pressed, the setting is stored and the
«Airflow» screen is displayed.
Note
- Make sure to set the Airflow settings for all fan speeds to
be used and measure the air volumes. If not performed,
the outputs of the fan speeds and the indications of the
icons may not be the same.
Eng-26
Boost Purge
< <