Mitsubishi Electric VL-250CZPVU-R-E Installation Manual page 22

6.4.2.3 Contrast
You can set Contrast of the screen.
Contrast
Main menu:
Light
F1 F2 F3
Note
- Adjust the contrast to improve viewing in different lighting conditions or different installation locations. This setting does
not always improve the display from all directions.
6.4.2.4 Display details
You can change the display details about clock and temperature, sensor value.
Display details
Clock No 24h
Temperature
Sensor value Yes
Select:
Cursor
F1 F2 F3
Note
- Sensor value includes [Outdoor temperature], [Return temperature], [Supply temperature], [CO
- To display the [Sensor value] on the «Main operation» screen, change the [Function setting] (See 6.4.6.3, 6.4.6.5),
[External input] ([CO concentration] display only, see 6.4.5) setting in addition to the setting.
2
- The outdoor and return temperatures are detected by the thermometer of the product.
- A CO sensor must be connected display the [CO
2
- The supply temperature is calculated based on the standard heat-exchange efficiency.
- The values will differ from the actual outdoor, return, supply temperatures, and CO
Dark
F4
/ No
Change
F4
concentration].
2
Press to adjust the contrast.
Press to save the changes.
Press to move the cursor.
,
Press to change the setting.
Press to save the changes.
Clock: See 6.4.2.4 Clock display
Temperature: Change the temperature display [Celsius (ºC)/
Fahrenheit (ºF)]
The factory default setting: ºC
Sensor value: C hange [Display (Yes)/Hide (No)] the sensor value
on the «Main operation» screen.
The factory default setting: No
Eng-22
concentration].
2
concentration.
2