Advertisement
NEXUS SOFTWARE - NSP
Installing the software
1. Insert the supplied USB Key into your
PC. If you have lost your USB key, you can
download the Haltech NSP software from the
DOWNLOADS section of the Haltech website.
2. If the window does not open automatically,
open My Computer and find the USB drive.
Double click on the USB drive icon.
3. Double click on the installer icon located in
the root directory of the USB drive.
4. Once the Haltech NSP software is installed,
run the software.
Going Online with the ECU
1. Plug the supplied USB-C cable into the
USB-C Port on the front of the NEXUS R5.
2. The USB-C connection will power the ECU in
a low power mode.
This mode allows the user to connect
to NSP for map configuration and data-
log extraction without powering the ECU
completely. ECU inputs and outputs are
disabled in low power mode.
3. NSP will recognise the ECU automatically.
4. Click File/Open to choose your base map.
8
Advertisement
