Table of Contents
Advertisement
SMA Solar Technology AG
1
Information on this Document
1.1
Validity
This document is valid for:
• SMA Sensor Module (MD.SEN-40) with assembly designation "PC-SENS.BG1" from
hardware version A1.
1.2
Target Group
The tasks described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated with installing, repairing and
using electrical devices and installations
• Training in the installation and commissioning of electrical devices and installations
• Knowledge of all applicable laws, standards and directives
• Knowledge of and compliance with this document and all safety information
1.3
Content and Structure of this Document
This document describes the installation, commissioning and decommissioning of the product.
You will find the latest version of this document and further information on the product in PDF format
at www.SMA-Solar.com.
Illustrations in this document are reduced to the essential information and may deviate from the real
product.
1.4
Levels of Warning Messages
The following levels of warning messages may occur when handling the product.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates a situation which, if not avoided, can result in property damage.
Installation Manual
DANGER
WARNING
CAUTION
NOTICE
1 Information on this Document
MDSEN-40-IA-en-11
5
Advertisement
Table of Contents
