Important Safety Information; Save All Warnings And Instructions For Future Reference - Craftsman CMXZSAJ94793 Instruction Manual

Workshop table and stool set
Table of Contents

Advertisement

Available languages

Available languages

Workshop Table and Stool Set
CMXZSAJ94793

IMPORTANT SAFETY INFORMATION


WARNING:
INJURY, USER MUST READ THIS INSTRUCTION
MANUAL BEFORE OPERATING PRODUCT.
a ) Read, study, understand and follow all instructions
before assembling or operating this device.
b ) Do not stand on the stool.
c ) Weight capacity and other product capabilities
apply to properly and completely assembled
product only.
d ) The warnings, cautions, and instructions in this
manual cannot cover all possible conditions or
situations that could occur. Exercise common sense
and caution when using this stool. Always be aware of
the environment and ensure that the stool is used in a
safe and responsible manner.
e ) Do not modify this stool in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the product.
There are specific applications for which the product
was designed.
f ) Use the right tool for the job. DO NOT attempt
to force small equipment to do the work of larger
industrial equipment. There are certain applications
for which this equipment was designed. It will be safer
and do a better job at the capacity for which it was
intended. DO NOT use this equipment for a purpose
for which it was not intended.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE
STOOL SPECIFICATIONS
Width
Height
Depth
Weight Each
Seat Capacity
TO REDUCE THE RISK OF
16.5" (419.1 mm)
28.4" (721.4 mm)
16.5" (419.1 mm)
10 lbs. (4.5 kg)
300 lbs. (136.1 kg
READ ALL INSTRUCTIONS
ASSEMBLY

Before assembling stool, make sure all parts are
present. Compare parts with contents list. If any
part is missing or damaged, do not attempt to
assemble, install, or operate the product.
Contact customer service for replacement parts.
Frame Installation (Fig. B)
1. Cross the upper leg
3
make an "X" shape at the top of the leg assembly.
2. Connect the footrest
four (4) M6 x 45 mm screws
nuts
7
and tighten.
Fig. B
6
7
over top of the lower leg
2
to the leg assembly with
6
and four (4) M6 locking
English
4
to
3
4
2
3

Advertisement

Table of Contents
loading

Table of Contents