Table of Contents
Advertisement
HUGHES BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
Things to do in the SETUP MENU
Current settings overview
An overview of the current settings can be reviewed without having to access each associated screen.
Scheduler
The digital satellite receiver is equipped with a SCHEDULER that allows up to 32 events to be
programmed. You can use the SCHEDULER feature along with
your VCR to record programs unattended. The SCHEDULER can
be used to automatically tune to a program at a specific date and
time or at a specific time on a repeating basis.
With the digital satellite receiver you can have programs taped
automatically.
When using the PreSelect To Tape feature, the following steps must
be completed for the digital satellite receiver to perform unattended
recording:
Attach the VCR Control cable as described in the chapter 2,
"Setting Up Your Satellite System."
Use the VCR SETUP utility as described elsewhere in this
chapter.
Set your VCR to match the output of the digital satellite receiver. This could be either RF
(channel 3 or 4) or A/V (phono or S-video).
Insert a recordable videotape of sufficient length in the VCR.
Leave the VCR turned ON.
Things to do in the SCHEDULER screen
The SCHEDULER screen displays up to seven rows of events. You can use the
through the events.
There are multiple settings for the On column: a check mark (ü) for viewing only, or a videotape
symbol (
) for taping.
Editing an event
The "Events" portion of the screen displays up to seven previously scheduled events at one time. If
more than seven events are already scheduled, you may use either the
key to view the additional events. A small arrow at the top or bottom of the event list indicates that
there are additional events.
Once you have highlighted the event you wish to set or edit, press
pop-up menu. If you choose the scheduling option, the digital satellite receiver will turn on (if
necessary) and tune to the specified channel at the correct date and time. If the Schedule to Tape
option is provided and is chosen, and you have successfully completed the VCR setup procedure, the
digital satellite receiver will allow recording of the event. To remove a previously scheduled event,
select the Delete option. If you inadvertently pressed
After choosing a scheduling option, a pop-up panel appears for channel selection. You can enter the
desired channel using either the number keys on the remote control or the
After specifying a channel, press the
P
7-4
AGE
, select Cancel.
key or select OK when you are ready to continue.
The SCHEDULER screen
key to scroll
key to scroll down, or the
. You will be prompted with a
and
or
and
.
Advertisement
Table of Contents
