Command Signs; Safety Measures At The Installation Location - BARTEC BENKE RVP-4 Operating Manual

Vapor Pressure Process Analyzer RVP-4
Safety

2.5.3 Command signs

Eye protection
Sticker 6 (see p. 36)
Hearing protection
Sticker 8 (see p. 36)
Hand protection
Sticker 5 (see p. 36)

2.6 Safety measures at the installation location

Work room requirements
40

This sign indicates that suitable safety goggles must be worn
(see also p. 47).

This sign indicates that suitable ear protectors must be worn
(see also p. 47) and is located on the control box (when the
control box cooling option is installed).

This sign indicates that suitable gloves must be worn
(see also p. 47).
•
Ensure that the work room is sufficiently ventilated.
•
Adhere to emission limit values. If necessary, install an
exhaust air treatment system.
•
Do not direct drawn-off air back into the work room.
•
Install washing facilities and eye baths in the workplace.
•
Install solvent-resistant flooring.
•
Creeping vapors can constitute an ignition source. Seal the
room properly to ensure that gases or vapors which could
contain ignition sources cannot enter the room.
•
Install equipment for detecting and reporting gas hazards.
May 2015