Advertisement
Quick Links
Advertisement
Related Manuals for Data Harvest Vu+
Summary of Contents for Data Harvest Vu+
- Page 1 User Guide...
-
Page 2: Table Of Contents
Licensee's premises. Data Harvest's policy is to continually improve products and services, so we reserve the right to make changes without notice. It is acknowledged that there may be errors or omissions in this publication for which responsibility cannot be assumed. No liability will be accepted for loss or damage resulting from use of information contained in this manual or from uses as described. -
Page 3: What Is Supplied
User Guide DS147 (5) 1.0 WHAT IS SUPPLIED? 1 × Vu Data Logger 1 × Vu Temperature Sensor 1 × USB Connecting Lead EasySense software (2 or higher) downloads Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 4: Ubuttons
The ENTER button is used to start data collection, progress to the next screen, confirm a choice or take a sample. The square STOP button is used to stop data being recorded or return to the previous screen. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 5: Vu + Sensors
Before connection to EasySense software, this must be set in Vu * Heat delivered to the probe is reported in Joules, relative to freezing point for H O at 1 cm probe exposure, J(rf). Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 6: Additional Plug-In Sensors
Setup via Setup Remote in the EasySense software to log data for a set period. The data is stored in Vu ’s memory to either be reviewed on Vu ’s screen or retrieved to the EasySense software on a computer. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 7: Using Vu Without Easysense (2 Or Higher) Software
► is pressed, rather than at regular time intervals. The samples are stored to Vu ’s memory - a maximum of ten samples per data set. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 8: Easylog
Stop Recording? 48.8 EasyLog ► to stop ►Snapshot █ to go back Timing 24.0 ˚C ▲ Samples taken 8 Samples taken 2 Press enter to take Press stop when you’ve taken a sample enough samples. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 9: Timing
One digital switch type sensor connected to input A or B to start and stop the timer. • Two digital switch type sensors connected to input A and B, use A to start and B to stop the timer. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 10: Counting
Use the enter button to toggle to the next screen if more than three sensors were logged. 4.9 Bluetooth Use this facility to turn the Bluetooth On. See later notes for connecting to via Bluetooth to a computer. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 11: System
Use this option to alter the format of the date display) i.e., from a European to USA date format (DD- MM-YY to MM-DD-YY). The actual time and date are set automatically by the computer’s clock. Ó Data Harvest Group Ltd. data-harvest.co.uk... -
Page 12: Decimals
5.2 Windows with Bluetooth EasySense Windows software must be installed on the target computer. Note: No Bluetooth pairing is required. Where a PC does not have Bluetooth capability, please consider using the Data Harvest 2071 adaptor. Step 1: , scroll to Bluetooth and ►... -
Page 13: Osx, Chromebook Using Usb
For information about the terms of the product warranty, see the Data Harvest website at: https://data- harvest.co.uk/warranty. Note: Data Harvest products are designed for educational use and are not intended for use in industrial, medical, or commercial applications. WEEE (Waste Electrical and Electronic Equipment) Legislation Data Harvest Group Ltd is fully compliant with WEEE legislation and is pleased to provide a disposal service for any of our products when their life expires.
Need help?
Do you have a question about the Vu+ and is the answer not in the manual?
Questions and answers