TEFAL BL841138 Manual page 147

WHAT TO DO IF YOUR APPLIANCE DOESN'T WORK
PROBLEMS
The appliance does not
work.
Excessive vibrations
Leak at the top of the jug.
Poorly-mixed preparations.
The appliance has cut the
electricity supply.
Your appliance continually
beeps and all the LEDs are
flashing.
CAUSES
The plug is not connected
or switched on at the mains
power socket.
The motor unit (B) is not
correctly positioned
locked in.
The appliance has not been
placed on a flat surface; the
appliance is not stable.
Volume of ingredients is too
high.
Overflow sensor (C)
clogged up.
Volume of ingredients is too
high.
Pieces of food are too large
or too hard.
Stop the motor using the
motor overload protector.
Appliance is damp.
Fouled up overflow sensor
Your appliance is equipped
with a level sensor (C).
SOLUTIONS
Plug your appliance into a
power socket. Ensure that
the power cord is correctly
inserted into the socket on
the side handle and mains
socket.
Remove some
ingredients.
Check that the contents
to not exceed the MAX
or
level and ensure that the
ingredients are
evenly over the base of the
jug.
Place your appliance on a
stable,flat heat-resistant,
clean, and dry surface.
Reduce the quantity of
ingredients processed.
is
Clean sensor (C).
Reduce the quantity of
ingredients processed.
Reduce the size or quantity
of ingredients processed.
Leave your product
cool down for at least 20
minutes and reduce the size
or quantity of ingredients
processed.
Add liquid.
Leave the appliance to dry
for 24 hrs before trying to
connect again.
(C) Clean the sensor (C)
Reduce the quantity of
ingredients.
of the
spread
EN
to
143 143