Renault KlGER Vehicle User Manual page 67

ON-BOARD COMPUTER (2/5)
Resetting the trip mileage
To reset the trip mileage recorder, the
display must show the Trip meter func-
tion.
Press and hold button 1 or 6.
Interpreting some of the
values displayed after
resetting
The values showing average fuel
consumption, range and average
speed will become more stable and re-
liable the further you travel after pres-
sing the reset button.
For the first few kilometres after pres-
sing the reset key you will notice that
the range increase/decrease as you
travel. This range takes into account
the average fuel consumption since the
last time the reset button was pressed.
Refer to the table on the following
pages showing display examples.
The current fuel consumption may in-
crease when,
– the vehicle stops accelerating.
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed).
– when driving from an urban area
onto the open road.
Resetting is automatic when the maxi-
mum capacity of any of the memories
is exceeded.
By pressing the button 5, the mes-
sages appearing in the instrument
panel will be acknowledged and will
be stored.
1.53