DigiPos RB1 Manual page 4

SAFETY INSTRUCTIONS
•
Always read the safety instructions carefully.
•
Keep this Manual for future reference.
•
Keep this equipment away from humidity and dust.
•
Lay the equipment on a reliable flat surface before setting it up.
•
The openings on the enclosure are for air convection, hence protecting the equipment from
overheating. DO NOT COVER THESE OPENINGS. For a more detailed explanation about
ventilation requirements, please check the appropriate section within this document.
•
Make sure the voltage of the power source (mains) conforms within the permitted range
before connecting the equipment to the power inlet. If you have any doubts, please contact a
licensed electrician to advise you accordingly.
•
Place the power cord in such a way that people cannot step on it. Do not place anything over
the power cord.
•
ALWAYS shut down the operating system and disconnect the unit from any power sources
before removing any connections (Keyboard, Mouse, etc..) or opening up the unit to fit
additional cards and or devices.
•
ALWAYS shut down the operating system and disconnect the unit from any power sources
before removing the front cover or attempting to remove the Blade or the Hard Drive.
•
All cautions and warnings on the equipment should be noted and adhered to.
•
Never pour any liquid into any openings. This could cause damage or electrical shock.
•
If any of the following situations arise, have the equipment checked by qualified service
personnel:
o The power cord or plug is damaged
o Liquid has penetrated into the DigiPoS Retail Blade™ or the external power supply
o The equipment has been exposed to moisture
o The DigiPoS Retail Blade™ is not working well or you can not get it to work according
to the User's Manual
o The DigiPoS Retail Blade™ has been dropped and damaged
o The DigiPoS Retail Blade™ has obvious signs of breakage or physical damage
•
Do not leave this DigiPoS Retail Blade™ in a non air-conditioned environment with a storage
temperature above 60ºc (140ºf) as it may damage the equipment.
•
For reasons of safety, gloves should be worn when assembling the DigiPoS Retail Blade™
after any work has been carried out.
NOTE
•
The technical descriptions, specifications and any associated diagrams or pictures of the
DigiPoS Retail Blade™ are subject to change without notice.
ACHTUNG!
•
Wir behalten uns Änderungen der technischen Beschreibungen bzw. Spezifikationen vor.
注意事項
本說明書所列規格僅供參考, 本公司保留產品修改變更之權利.
•
為了您的安全, 拆裝PC內部組件時請戴白手套以防割傷.
•
D i g i P o S R e t a i l B l a d e
P a g e 4 o f 1 0 0
C o p y r i g h t © 2 0 0 5 D i g i P o S S y s t e m s G r o u p
™
M a n u a l