Table of Contents
Advertisement
The term "WARNING!" indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or
death.
The term "CAUTION!" indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it
may result in damage to the equipment that may not be covered under the warranty.
The term "IMPORTANT!" indicates instructions or information that are vital to the successful completion of the procedure.
The term "NOTE" is used to indicate additional useful information.
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated
"dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to humans.
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and
operating and maintenance instructions in this manual.
WARNING!
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Elevated Operating Ambient – The ambient operating temperature of the installation environment may be greater than
room ambient. Consideration should be given to ensure that the maximum operating temperature range (0°C to 50°C, 32°F
to 122°F ) is not exceeded. Reduced Air Flow – Installation of the equipment should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Do not submerge the apparatus in water or liquids.
7.
Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
8.
Clean only with a dry cloth.
9.
Install in accordance with the manufacturer's instructions.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
11. Only use attachments/accessories specified by the manufacturer.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
13. Adhere to all applicable local codes.
14. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Maintenance and Repair
WARNING!
Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or
the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a
QSC authorized service station or an authorized QSC International Distributor. QSC is not responsible for any injury, harm
or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs.
TD-001576-01-A
Explanation Of Terms And Symbols
Important Safety Instructions
ii
Advertisement
Table of Contents
