Table of Contents
Advertisement
Name
Left
Right
Center
LFE
LeftSurround
RightSurround
LeftSideSurround
RightSideSurround
HearingImpaired
VisualNarration
LeftCenter
RightCenter
LeftRearSurround
RightRearSurround
LeftTopSurround
RightTopSurround
LeftHeight
RightHeight
CenterHeight
TopSurround
LeftSurroundHeight
RightSurroundHeight
LeftSideSurroundHeight
RightSideSurroundHeight
LeftRearSurroundHeight
RightRearSurroundHeight
CenterSurround
LeftCenterHeight
RightCenterHeight
Automation Settings
The CMS has an built in library of devices and their associated automation cues that can be added to playlists for fully automated
theater control. The cues provided can be edited as needed and additional cues can be added for a device as well. In addition, user-
defined devices and cues can be created.
Activating and Creating Devices
To make device cues visible in the Builder and Player pages, the device must be activated during setup. The Automation device
configuration can be accessed by logging in to the CMS-5000 UI application with installer or administrator privileges and navigating to
System->Automation.
•
To view all available devices, click the Show Inactive checkbox next to the Devices list. This will display all devices currently in
the Automation library. You can select any device and edit to activate as described below. Alternately, you can use the create (+)
button to open the Edit Devices page and select the device you wish to activate from the Choose Device dropdown list.
•
To enable projector cues, open the Edit Devices page and select the projector type in which the CMS is installed. For all projectors,
the IP address and port will be automatically populated with the correct default port and IP address of the internal server/projector
connection for that projector type. This is the primary port that should be used to drive projector cues. When this is used, no other
network connection needs to be established between the CMS and the projector. Click Save to activate the projector cues.
TD-001576-01-A
— Table 5 —DTS:X Audio Channel Mapping
Abbrev.
L
urn:smpte:ul:060E2B34.0401010D.03020101.00000000
R
urn:smpte:ul:060E2B34.0401010D.03020102.00000000
C
urn:smpte:ul:060E2B34.0401010D.03020103.00000000
LFE
urn:smpte:ul:060E2B34.0401010D.03020104.00000000
LS
urn:smpte:ul:060E2B34.0401010D.03020105.00000000
RS
urn:smpte:ul:060E2B34.0401010D.03020106.00000000
LSS
urn:smpte:ul:060E2B34.0401010D.03020107.00000000
RSS
urn:smpte:ul:060E2B34.0401010D.03020108.00000000
HI
urn:smpte:ul:060E2B34.0401010D.0302010E.00000000
VIN
urn:smpte:ul:060E2B34.0401010D.0302010F.00000000
LC
urn:smpte:ul:060E2B34.0401010D.0302010B.00000000
RC
urn:smpte:ul:060E2B34.0401010D.0302010C.00000000
LRS
urn:smpte:ul:060E2B34.0401010D.03020109.00000000
RRS
urn:smpte:ul:060E2B34.0401010D.0302010A.00000000
TSL
TSR
LH
RH
CH
TS
LHS
RHS
LSSH
RSSH
LRSH
RRSH
CS
urn:smpte:ul:060E2B34.0401010D.0302010D.00000000
LCH
RCH
URI tag
http://dts.com/mda/channels#TSL
http://dts.com/mda/channels#TSR
http://dts.com/mda/channels#LH
http://dts.com/mda/channels#RH
http://dts.com/mda/channels#CH
http://dts.com/mda/channels#TS
http://dts.com/mda/channels#LHS
http://dts.com/mda/channels#RHS
LSSHnoURIByDTS
RSSHnoURIByDTS
LRSHnoURIByDTS
RRSHnoURIByDTS
http://dts.com/mda/channels#LCH
http://dts.com/mda/channels#RCH
12
DCP Ch #
1
2
3
4
5
6
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
