Adjusting The Transmission Cable; Checking The Tire Pressure - Toro 36001 Operator's Manual

Adjusting the Transmission
Cable
Service Interval: After the first 2 hours
Yearly
If the wheels easily stall out, or if the wheels drive without
engaging the self-propel handle, adjust the transmission cable.
1. Loosen the nut on the upper cable clamp, but do not
remove it (Figure 22).
1. Nut
2. Pull the cable down to remove most of the slack in the
cable (Figure 22).
Important: Do not remove all the slack from the
cable. Removing all the slack from the cable may
cause the wheels to engage without engaging the
self-propel handle.
3. Tighten the nut (Figure

Checking the Tire Pressure

Service Interval: Yearly
Check the air pressure in the tires and inflate them to 103 to
137 kPa (15 to 20 psi).
Figure 22
2. Cable
22).
15