Specifications; Heat Settings; Functions / Settings - Stanley ST-02-230-E Instruction Manual

NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER
RATED POWER INPUT (kW)
RATED POWER INPUT (BTU)
AIR FLOW (m /H)
3
HEATING AREA (m
RATED VOLTAGE/
FREQUENCY (Volt / Hz)
(ST-230-E)
RATED VOLTAGE/
FREQUENCY (Volt / Hz)
(ST-240-E)

HEAT SETTINGS

WEIGHT (kg)
APPLIANCE CLASS
INGRESS PROTECTION
RATING (IP)
Unit is Off
Fan Runs - No Heating
Fan Runs - Quarter Power
Heating
Fan Runs - Half Power
Heating
Fan Runs - Full Power
Heating
Heating element will shut off when desired temperature is reached. Fan will run continuously.
ST-02-230-E / ST-02-240-E / ST-03-230-E / ST-03-240-E / ST-033-230-E / ST-033-240-E
Heating element will shut off when desired temperature is reached.
NOTE: Heater models ST-02-230-E and ST-02-240-E, sold in the UK,
© 2021, Obelis S.A. Registered Address:
Bd. Général Wahis, 53, 1030 Brussels, Belgium

SPECIFICATIONS

Specifications subject to change without notice
ST-02-230-E
ST-02-240-E
2.0
6820
260
)
20
2
230~ 50
220-240~
50
3
4.8
1
IPX4

FUNCTIONS / SETTINGS

NOTE: ST-05-400-E / ST-09-400-E
use 13A fuse with BS1363 three pins plug only.
SOURCE
ST-03-230-E ST-033-230-E
ST-03-240-E ST-033-240-E
3.0 3.3
10,250 11,260
514 514
30 30
230~ 50 230~ 50
220-240~ 220-240~
50 50
2 2
6.7 6.7
1 1
IPX4 IPX4
6
ST-05-400-E
5.0
17,060
774
48
400~ 50
—
2
7.4
1
IPX4
Fan will not run continuously.
ST-09-400-E
9.0
30,710
1198
80
400~ 50
—
2
11
1
IPX4