Makita DUR192L Instruction Manual page 14

2. Set the angle and position of the handle as shown
in the figure, and then tighten the bolt.
► 1 . Handle
Adjusting handle and hanger
position
1.
Loosen the hex socket head bolt on the handle.
Move the handle to a comfortable working position, and
then tighten the bolt.
1
► 1 . Hex socket head bolt 2. Handle
2.
Move the hanger to a comfortable working position and
then tighten the bolt.
1
► 1 . Hanger 2. Hex socket head bolt
Installing the protector
guard illustrated in place. Failure to do so can
cause serious personal injury.
the cutter for cutting the nylon cord.
Attach the protector to the clamp using bolts.
2
► 1 . Hex socket head bolt 2. Clamp 3. Protector
14 ENGLISH
Loosen the hex socket head bolt on the hanger.
WARNING:
Never use the tool without the
CAUTION:
Take care not to injure yourself on
1
4. Cutter
1
2
2
3
4