Installation; Operation - HAMPTON BAY EST-13-10-Y Use And Care Manual

Mini stove
Table of Contents

Advertisement

Available languages

Available languages

Installation

The stove should be located in an area:
□ Out of direct sunlight
□ Not susceptible to moisture
□ Away from uninsulated outside wall
WARNING
The stove is heavy and should be assembled near its
desired location.
It is recommended that two people move the assembled
stove to prevent injury.
WARNING
Do not install the unit on shelves, raised platforms, beds, blankets, pillows etc. Keep combustible materials such as furniture, bedding,
papers, clothes and curtains at least 3 ft. (914 mm) from the stove.

Operation

Read All Instructions Before Use
Check that the heater outlet grill is not covered or obstructed in anyway, and make sure the power to the unit is switched on.
NOTE: When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the
heater is not used for an extended period of time.
1
Using the Control Panel
□ The control panel is located behind the door of the stove.
□ Main Power Switch: The Power
to all of the functions of the stove. This switch must be in the
ON position for any functions to work.
□ Flame Effect: Toggle the Power Switch ON. The Power
indicator light will glow. The flame effect will be visible
through the front glass.
□ Temperature Knob: Toggle the Temperature Switch ON, to
turn on the heater.
Clearance to Combustibles
Sides
Floor
Top
Front
Rear
Switch supplies power
7
4 in. (101.6 mm)
0 in. (0 mm)
36 in. (914 mm)
36 in. (914 mm)
0 in. (0 mm)
Please contact 855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Est-13-50-yEst-13-60-y100306339210030633951003063396

Table of Contents