Page 1
NOTE: Please read all instructions carefully before using this REGENERATING product MAGNETIC RECUMBENT Table of Contents BIKE Safety Notice ME-706 Important Assembly Information Care and Maintenance Parts List Warranty Ordering Parts Model ME-706 Retain This Manual for Reference 190429 IMPORTANT:...
Page 2
WARRANTY....................………….. 22 ORDERING PARTS....................ORDERING PARTS..................…………. 22 BEFORE YOU BEGIN Thank you for selecting the MARCY REGENERATING MAGNETIC RECUMBENT BIKE ME-706 by IMPEX INC. For your safety and benefit, ® read this manual carefully before using the equipment. As a manufacturer, we are committed to provide you complete customer satisfaction.
Page 3
IMPORTANT SAFETY NOTICE PRECAUTIONS This Recumbent Bike is built for optimum safety. However, certain precautions apply whenever you operate a piece of the recumbent bike. Be sure to read the entire manual before you assemble or operate your bike. In particular, note the following safety precautions: Keep children and pets away from the machine at all times.
Page 4
EXERCISE GUIDELINES Using your REGENERATING MAGNETIC RECUMBENT BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with a calorie controlled diet help you lose weight. 1. The Warm-Up Phase This stage helps get the blood flowing around the body and the muscles working properly. It will also reduce the risk of cramp and muscle injury.
Page 5
3. The Cool Down Phase This stage is to let your cardio-vascular system and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the stretch.
Page 6
IMPORTANT ASSEMBLY INFORMATION Tools required for assembling the bench: 2 adjustable wrenches and Allen wrenches. NOTE: it is strongly recommended that this equipment is assembled by two or more people to avoid possible injury. Ensure carriage bolts are inserted through the SQUARE holes on components that need to ...
Page 7
CARE AND MAINTENANCE 1. Lubricate moving parts with WD-40 or light oil periodically. 2. Inspect and tighten all parts before using the equipment. 3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. 4.
Page 8
PRE-ASSEMBLY CHECK LIST NO:1 NO:7 NO:32 NO:4 NO:34 NO:2 NO:3 NO:97L/R NO:5L NO:8 NO:19L/R NO:5R NO:37 NO:33 NO:23L/R NO:6 Description Part No. Q'ty Main frame Rear support tube Seat support bracket Front post Back cushion Front stabiliser Rear stabiliser Front post cover 19L/R Pedal (L&R) 97L/R...
Page 9
Seat cushion 23L/R Left /Right cover for sliding tube Computer HARDWARE PARTS LIST Description Drawing Q’ty Allen bolt M8 x ⅝" Curved washer Φ8 x ¾" Flat washer Φ⅜" Allen bolt M8 x 2⅛" Level adjustment Ball end cap Carriage bolt M8 x 2" Acorn nut M8 Locking washer Allen wrench...
Page 10
CONSOLE INSTRUCTIONS A. Program select and setting value 1. Use the UP or DOWN keys to select program mode then press ENTER to confirm your exercise mode. 2. In the Manual mode, use the UP or DOWN keys to set up your exercise TIME, DISTANCE, CALORIES, PULSE. 3.
Page 11
Key function: There are 6 buttons as follows: 1. START/STOP key: Quick Start function: Allows you to start the computer without selecting a program. Manual workout only. Time automatically begins to count up from zero During the exercise mode, press the key to STOP exercise. During the stop mode, press the key to START exercise.
Page 12
User Setting Program: User 1, User 2, User 3, User 4 Program 14 to 17 are the user setting programs. Users are free to create the values in the order of TIME, DISTANCE, CALORIES and the resistance level in 10 columns. The values and profiles will be stored in the memory after setup. Users may also change the ongoing loading in each column by UP/DOWN keys, and they will not change the resistance level stored in the memory.
Page 13
Watt Control Program: Watt Control Program 23 is a Speed Independent Program. Press ENTER key to set up the values of TARGET WATT, TIME, DISTANCE and CALORIES. During the exercise mode, the level of resistance is not adjustable. For example, the level of resistance may increase while the speed is too slow.
Page 14
Error Messages: E1 (ERROR 1): Normal state: during workout, when the monitor did not get the count signal from the gear motor more than 4 seconds and check under successive 3 times, then the LCD will show E1. Power on state: the gear motor will return to zero automatically, when the signal of motor cannot be detected for more than 4 seconds, then the gear motor’s driver will be cut off immediately and show the E1 on the LCD display.
Page 15
USER SETTING PROGRAM PROGRAM 14 USER 1 PROGRAM 15 USER 2 PROGRAM 16 USER 3 PROGRAM 17 USER 4 HEART RATE PROGRAM PROFILES: PROGRAM 18 55% H.R.C. PROGRAM 19 65% H.R.C. PROGRAM 20 75% H.R.C. PROGRAM 21 85% H.R.C. PROGRAM 22 TARGET H.R.C.
Page 16
WATT CONTROL PROGRAM PROGRAM 23 WATT CONTROL BODY FAT TEST PROGRAMS: PROGRAM 24 BODY FAT (STOP MODE) BODY FAT (START MODE) One of the following 6 profiles will display automatically after measuring your BODY FAT: Workout time: 40 minutes Workout time: 40 minutes Workout time: 20 minutes Workout time: 40 minutes Workout time: 40 minutes Workout time: 20 minutes...
Page 17
PARTS LIST Part # Description Main frame Front stabiliser Rear stabiliser Front post Handlebar L & R Computer Rear support tube Front post cover Middle computer wire Front extension hand pulse wire Upper foam grip for stationary handlebar Screw M5 x ½" End cap for handlebar Allen bolt M8 x ⅝"...
Page 18
Screw M2.5 Foam grip for rear handlebar Hand pulse wire Carriage bolt M8 x 2" Acorn nut M8 Grommet End cap for pedal cover Flange screw Pedal cover Left support tube for pedal cover (L&R) Back cover for pedal cover Self tapping screw ST5 x ⅜"...
Page 22
LIMITED WARRANTY Pure-Tec warrants this product to be free from defects in workmanship and material, under normal use and service conditions. Please refer to www.puretecfitness.com for warranty terms. This warranty extends only to the original purchaser and is valid for home use only. Pure-Tec’s obligation under this Warranty is limited to replacing damaged or faulty parts at Pure-Tec’s option.
Need help?
Do you have a question about the ME-706 and is the answer not in the manual?
Questions and answers