Advertisement
clamping pressure adjustment
height adjustment warnings
• Always adjust the height of the marimba with rails, resonators and bars installed.
• Release the levers one end at a time.
• Always keep marimba ends at equal heights.
• Do not release the end levers at the same time.
marimba cleaning
USE A SOFT COTTON RAG OR TOWEL DAMPENED WITH WATER ONLY.
DO NOT USE FURNITURE POLISH on your marimba!
Most of this type of product contains silicone, which will damage the finish and
contaminate the wood.
moving the marimba
THE MARIMBA SHOULD ONLY BE LIFTED BY THE END FRAMES.
• Lifting by the rails will cause the rails to come out of their slots.
• When the marimba is moved, pass VERY SLOWLY through
doorways, over doorjambs, electrical cords, and uneven surfaces.
100320 - Rev. A
To increase clamping pressure turn wheel clockwise.
To decrease clamping pressure turn wheel counter-clockwise.
Page 10 of 11
Advertisement
