Height Adjustment - Marimba One WAVE Xylophone Owner's Manual

height adjustment

CAUTION!
To prevent damage, always adjust the
height of the marimba with all rails,
resonators and bars INSTALLED.
1
2
Locate the height
gauges on the inside
edges of frame.
100320 - Rev. A
RELEASE LEVERS ONE
3
Raise or lower
the end frame.
DO NOT RELEASE LEVERS
AT THE SAME TIME.
AT A TIME.
4
Use gauges to ensure that
both ends are always at
the same height.
5
Close levers when
desired height is
achieved.
Page 9 of 11