NOMA 052-9340-2 Instruction Manual page 7

Contemporary 42”
Table of Contents

Advertisement

Available languages

Available languages

ASSEMBLY
NOTE: For added security, attach safety
cable from fan unit to "J" hook in outlet
box. Secure by looping zip tie through
safety cable and "J" hook. Tighten zip
tie securely.
4. Wiring instructions
IMPORTANT: If you are not sure if the electrical outlet box and fan are grounded, contact a
licensed electrician
WARNING
be
fore wiring.
Remote and Receiver Pairing
Codes are set by pushing the location of the dip switches located on the transmitter and receiver
up or down. It is important that the code used for both the remote and receiver are identical for
the two devices to be able to communicate; otherwise the remote will not be able to control
the fan.
If you plan to install more than one fan then each fan
will require the remote and receiver to use a unique
code, or else one remote will be able to control
more than one fan.
Installing Receiver Assembly
Once the connection has been made, the receiver
inserts into the drop rod hanging bracket. The canopy
comes up to cover the receiver and bracket .
Making Connections
Between fan and receiver:
.
Connect the black wire marked "L" from the fan to the black wire marked "TO MOTOR L"
from the receiver.
·
Connect the blue wire marked "FOR LIGHT" from the fan to the blue wire marked "FOR
LIGHT" from the receiver.
.
Connect the white wire marked "N" from the fan to the WHITE wire marked "TO MOTOR
N" from the receiver.
Between receiver and mains:
·
Connect the black live wire marked "AC IN L" from the receiver to the live wire (typically
black) from the outlet box.
·
Connect the white neutral wire marked "AC IN N" from the receiver to the neutral wire
(typically white) from the outlet box.
.
Connect the green ground wires from the mounting bracket and nylon ball to the ground
wire (bare or green) from the outlet box.
Receiver
Antenna:
DO NOT CUT
OR SPLICE
for advice. They must be grounded for safe operation.
Hanger
Bracket
Hanger
Ball
ensure
Receiver
"J" hook
zip tie
OPEN BATTERY HOUSING
COVER BY PRESSING DOWN
AND SLIDING OUT
ON
DIP
DIP SWITCH
ANTENNA
TRANSMITTER
nylon ball
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents