Table of Contents
Advertisement
Quick Links
1
APPLICATION ................................................................................ 3
2
DESCRIPTION (FIG. A) .................................................................. 3
3
PACKAGE CONTENT LIST ............................................................ 3
4
SYMBOLS ....................................................................................... 3
5
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
5.1
Working area .......................................................................................................... 4
5.2
Electrical safety ..................................................................................................... 4
5.3
Personal safety ...................................................................................................... 5
5.4
Power tool use and care ........................................................................................ 5
5.5
Service .................................................................................................................... 5
6
SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS .................. 5
7
ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ............... 6
8
CHARGERS .................................................................................... 7
8.1
Batteries ................................................................................................................. 7
8.2
Chargers ................................................................................................................. 7
9
9.1
Charger indications (Fig. 1) ................................................................................... 7
9.2
Removal / insertion of battery (Fig. 2) .................................................................. 8
9.3
Battery capacity indicator (Fig. 3) ......................................................................... 8
10
OPERATION.................................................................................... 8
10.1
Replacing saw blades (Fig. 4) ............................................................................... 8
10.2
Angle cutting adjustment (Fig 5) .......................................................................... 8
10.3
Switch on and off (Fig. 6) ...................................................................................... 9
10.4
Adjusting the pendulum regulation knob (Fig. 7) ................................................ 9
10.5
Use laser line generator (Fig. 8) ............................................................................ 9
10.6
LED work light (Fig. 8) ........................................................................................... 9
10.7
Adjusting the parallel guide (Fig. 9) .................................................................... 10
11
OPERATION.................................................................................. 10
11.1
Special notes on jig sawing ................................................................................ 10
Copyright © 2018 VARO
POWDP2530
P a g e
| 1
EN
www.varo.com
Advertisement
Table of Contents
Related Manuals for Powerplus POWDP2530
Summary of Contents for Powerplus POWDP2530
-
Page 1: Table Of Contents
POWDP2530 APPLICATION ................3 DESCRIPTION (FIG. A) ..............3 PACKAGE CONTENT LIST ............3 SYMBOLS ..................3 GENERAL POWER TOOL SAFETY WARNINGS ......4 Working area ......................4 Electrical safety ..................... 4 Personal safety ...................... 5 Power tool use and care ..................5 Service ........................ - Page 2 POWDP2530 11.1.1 Sawing wood ......................10 11.1.2 Sawing metal ......................10 11.1.3 Sawing plastic ......................10 CLEANING AND MAINTENANCE ..........10 12.1 Cleaning ....................... 10 12.2 Maintenance ......................11 TECHNICAL DETAILS ..............11 NOISE .................... 11 WARRANTY .................. 11 ENVIRONMENT ................12 DECLARATION OF CONFORMITY ..........
-
Page 3: Application
POWDP2530 JIGSAW 20V (NO ACCU) POWDP2530 1 APPLICATION The power tool is intended for sawing wood, metal and plastics. Not suitable for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 4: General Power Tool Safety Warnings
POWDP2530 "Class II - The machine is double insulated; Earthing Read manual before use wire is therefore not necessary (only for charger) Ambient temperature 40°C Do not expose charger and max. (only for battery) battery pack to water Use battery and charger only... -
Page 5: Personal Safety
POWDP2530 Personal safety ▪ Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury. -
Page 6: Additional Safety Instructions For Lasers
POWDP2530 ▪ When using jig saws ear protectors and a face mask should be worn. Exposure to noise can cause damage to hearing. ▪ Do not use the jig saw to cut asbestos or materials containing asbestos. ▪ Do not leave power tools running unattended. Always switch off and do not put down or leave until it has stopped completely. -
Page 7: Additional Safety Instructions For Batteries And Chargers
POWDP2530 8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Batteries ▪ Never attempt to open for any reason. ▪ Do not store in locations where the temperature may exceed 40 °C. ▪ Charge only at ambient temperatures between 4 °C and 40 °C. -
Page 8: Removal / Insertion Of Battery (Fig. 2)
POWDP2530 Note: if the battery does not fit properly, disconnect it and confirm that the battery pack is the correct model for this charger as shown on the specification chart. Do not charge any other battery pack or any battery pack that does not securely fit the charger. -
Page 9: Switch On And Off (Fig. 6)
POWDP2530 ”, adjust ▪ Loosen the soleplate by pushing the lock lever (18) onto the unlock position” the soleplate to the desired angle and tight it by pulling the lock lever onto the lock ”. position” ▪ Angle setting can be seen on scale on top of the base plate. -
Page 10: Adjusting The Parallel Guide (Fig. 9)
POWDP2530 WARNING: Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work piece. Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a person for longer than 0.25s. -
Page 11: Maintenance
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. ▪ Repairs may only be carried out by an authorised customer service centre for Powerplus tools. Copyright © 2018 VARO P a g e | 11 www.varo.com... -
Page 12: Environment
POWDP2530 ▪ You can always obtain more information at the number 00 32 3 292 92 90. ▪ Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing. ▪ At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload. -
Page 13: Declaration Of Conformity
POWDP2530 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: JIG SAW 20V Trade mark: POWERplus Model: POWDP2530 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the POWDP2530 and is the answer not in the manual?
Questions and answers