Recommended Nozzles - Riello RG1RKD Installation, Use And Maintenance Instructions

6.3

Recommended nozzles

The burner complies with the emission requirements of the EN
267 standard.
In order to guarantee that emissions do not vary, recommended
and/or alternative nozzles specified by manufacturer in the In-
struction and warning booklet should be used.
It is advisable to replace nozzles every year dur-
ing regular maintenance operations.
WARNING
Monarch type R;
Steinen type S - Q;
Danfoss type S - B;
Delavan type W - B.
To achieve CLASS 3 (EN267:1999) emissions
hollow-cone nozzles have been used.
WARNING
The use of nozzles other than those specified by
manufacturer and inadequate regular mainte-
nance may result into emission limits non-con-
forming to the values set forth by the regulations
in force, and in extremely serious cases, into po-
tential hazards to people and objects.
CAUTION
The manufacturing company shall not be liable for
any such damage arising from non-observance of
the requirements contained in this manual.
20138077
Start-up, calibration and operation of the burner
22 GB