Back-Panel Connectors; Ps/2 Keyboard & Ps/2 Mouse Connectors; Usb0/Usb1 Port Connectors; Com1 Connector - Shuttle Spacewalker MV18 User Manual

Fc-pga/ppga celeron and fc-pga pentium iii processor based main board
Table of Contents

Advertisement

# # # # # Back-Panel Connectors

PS/2 Keyboard & PS/2 Mouse Connectors
B1
Two 6-pin female PS/2 keyboard & Mouse
connectors are located at the rear panel
of mainboard. Depending on the com-
puter housing you use (desktop or tower),
the PS/2 Mouse connector is situated at
the top of the PS/2 Keyboard connector
when the mainboard is laid into a desk-
top, as opposed to a tower where the PS/2
Mouse connector is located at the right of
the PS/2 Keyboard. Plug the PS/2 keyboard
and mouse jacks into their corresponding
connectors.

USB0/USB1 Port Connectors

B2
This mainboard offers 2 USB ports on
back-panel. Plug each USB device jack
into an available USB0/USB1 connector.
B3

COM1 Connector

This mainboard can accommodate one
serial device on COM1.
Attach a serial device cable to the DB9
serial port COM1 at the back-panel of
your computer.

VGA Connector

B4
A 15-pin VGA connector is located at the
rear panel of mainboard.

Parallel Port Connector

B5
One DB25 female parallel connector is
located at the rear panel of the mainboard.
Plug the connection cable from your par-
allel device (printer, scanner, etc.) into this
connector.
PS/2 Mouse
PS/2 keyboard
- 33 -
USB1
USB0
COM1
VGA
foxc on n
Parallel Port

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spacewalker mv19

Table of Contents