Equipment Identification; Door Opening - Bonnet Neve MULTIFREEZ BIO User Instructions

Hide thumbs Also See for MULTIFREEZ BIO:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
8.
USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED
PRODUCTS.
THIS APPLIANCE IS ONLY DESIGNED FOR USE AT A MAXIMUM ALTITUDE OF 2000
METRES ABOVE SEA LEVEL.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment itself due to display of
products other than the afore-specified.
9.

EQUIPMENT IDENTIFICATION

Located on the plate affixed to the machine to detect the technical data.
Check the model and power supply voltage before carrying out any operation.
If discrepancies are found, immediately contact the manufacturer or the company that supplied the equipment.
1.
Manufacturer
2.
Code
3.
Conformity marking
4.
Power supply voltage (V)
5.
Power supply frequency (Hz)
6.
Absorbed electrical power (W)
7.
Absorbed electrical power in defrosting (W)
8.
Light max. power (W)
9.
Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change or alter the data
contained in it.
10. POSITIONING

11. DOOR OPENING

Warning!
MAXIMUM ANGLE OF DOOR OPENING = 115°
For correct working of the torsion bar and to avoid any break of the door or of the hinge
do not exceed the maximum angle of door opening i.e. 115°.
MULTIFREEZ BIO
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
The equipment is equipped with one-directional wheels and adjustable feet.
To stop and position the equipment, screw in or out the feet 10 mm lower than the wheels.
It is strictly necessary after positioning to stabilise the equipment on the
ground.
1
4
5
6
7
8
9
3
Stop the cabinet by feet.
2 0 / 6 8
PAGE
UM000411
N° DOC
2
10
*Example of
11
data plates
11

Advertisement

Table of Contents
loading

Table of Contents