General Information - Bonnet Neve MULTIFREEZ BIO User Instructions

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
2.

GENERAL INFORMATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it with a soft cloth;
for the glass parts only use specific products, avoiding the use of water which can leave on the glasses limestone residues.
It is fundamental to comply with the distances indicated (cm) for correct installation of the equipment.
10
3. LOADING
MULTIFREEZ BIO
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
• It is necessary that the capacitor unit is in the free air exchange condition, therefore
the ventilation zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power
socket.
• Never place containers of liquid on or immediately above the ticket counter; should
the content spill out, it would damage the counter.
• The measured sound pressure emanated A is below 70dB (A).
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS
ENVIRONMENT WITH RISK OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
CLIMATE CLASS
0
1
2
3
4
6
5
7
8
Warning! It's absolutely forbidden to place the product in the
tanks over the max load level.
49 Kg
It is fundamental not to exceed the load limits indicated to avoid altering correct
air circulation and thereby avoid a higher product temperature.
49 Kg
49 Kg
WARNING:
49 Kg
• The product must not obstruct the display area completely.
• Avoid leaving shelves empty so as not to create turbulence wich may prejudic
49 Kg
refrige-rated air flow, and cause needless energy consumption.
For the correct air circulation necessary to leave 4cm free space
between the product and the bottom of each internal shelf.
Attention!
It is strictly necessary to comply with the max loads indicated (Kg)
for each shelf to avoid deformation or breakage.
PAGE
N° DOC
ENVIRONMENT OPERATING TEMPERATURE
20
16
22
25
30
27
40
35
23,9
1 7 / 6 8
UM000411