Related Manuals for Shure SBC840M
Summary of Contents for Shure SBC840M
- Page 1 SBC840M 8-Bay Networked Charger Complete user guide for the SBC840M 8-bay networked charger, which fits SB910M batteries. Version: 1.2 (2021-E)
-
Page 2: Table Of Contents
Shure Incorporated Table of Contents Network Connections SBC840M 8-Bay Networked Charger Connecting Shure Devices to Wireless Workbench IMPORTANT SAFETY INSTRUCTIONS Configuration Tips WARNING Monitoring Batteries with Wireless Workbench General Description Charger Network Settings Features Firmware Furnished Accessories Connecting to an External Control System... -
Page 3: Sbc840M 8-Bay Networked Charger
Shure Incorporated SBC840M 8-Bay Networked Charger IMPORTANT SAFETY INSTRUCTIONS READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions. -
Page 4: Warning
Please follow your regional recycling scheme for batteries, packaging, and electronic waste. Note: Model information and power ratings are labeled on the bottom of the unit. General Description The SBC840M networked charger provides a compact charging and storage solution for up to 8 SB910M batteries. The charg ® er is network-enabled to allow for remote monitoring of charger and battery parameters using Shure Wireless Workbench soft ware. 4/15... -
Page 5: Features
LEDs indicate charge status and errors • Storage mode to prepare batteries for long-term storage • Network-enabled for remote monitoring Furnished Accessories Power supply PS60 Note: Model availability depends on region. See your local Shure dealer or distributor for details. 5/15... -
Page 6: Controls And Connectors
Shure Incorporated Controls and Connectors ① Power LED ◦ White = Power is on ◦ Red = Charger is in storage mode ② Reset Button Press and hold to restore charger factory settings, including network settings. ③ Storage Mode Button Press and hold to activate or deactivate storage mode, which charges or discharges batteries to the optimal voltage for long-term storage. -
Page 7: Power
Shure Incorporated ④ Charging Status LED ◦ Red = Charging ◦ Green = Charging complete ◦ Amber = Battery is in storage mode See LED Indicators for details. ⑤ Error LED Flashes amber to indicate a problem charging batteries. Errors are also displayed in Wireless Workbench. See LED Indica tors for details. ⑥ Charging Slots Insert 1 SB910M battery. - Page 8 Error LED amber flashing Check the temperature. If the battery temperature is above 60°C or below 0°C, the error LED flashes. Contact Shure service. Battery may be discharged beyond recovery or have internal problems. Replace battery. Charge status LED red Battery too warm.
-
Page 9: Storage Mode
Shure Incorporated Color State Power LED red Batteries are approaching storage voltage. Charge status LED red flashing Power LED white flashing Charger firmware is being updated. All LEDs flashing Hardware identification. Tip: Wireless Workbench provides more detailed battery status information. -
Page 10: Connecting Shure Devices To Wireless Workbench
If you have multiple devices to manage, connect each device to a router or network switch. The Ethernet port LEDs on your device will illuminate to indicate network connectivity. Verify that Shure devices can see each other by looking for the network connectivity icon on the front panel (location varies). -
Page 11: Configuration Tips
• Use multiple Ethernet switches to extend the network for larger installations For more help, visit the Help menu in Wireless Workbench or http://www.shure.com/wwb. Monitoring Batteries with Wireless Workbench Wireless Workbench provides detailed information for batteries currently docked in the charger. You can also view battery error notifications and change the charger's network settings. -
Page 12: Firmware
Software is available for download from http://www.shure.com/update-utility. Connecting to an External Control System The SBC840M networked charging station connects to external control systems such as AMX or Crestron via the Ethernet. For a comprehensive list of command strings, visit the product page at https://www.shure.com. -
Page 13: Specifications
-29°C (-20°F) to 74°C (165°F) Network Interface 10/100 Mbps Ethernet Network Addressing Capability DHCP or Manual IP address Certifications Meets essential requirements of all applicable European Directives. Eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance 13/15... -
Page 14: Information To The User
Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC perfor mance. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. Please consider the environment, electric products and packaging are part of regional recycling schemes and do not belong to regular household waste. - Page 15 Shure Incorporated 15/15...