Disposal - Scheppach AB1700 Operating Manual

4. Tighten the sight glass again and check the oil
level. If necessary, add oil or drain off excess oil
until the oil level is correct.
5. Check the oil level once more after a short period
Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: All chisels, carbon brushes
* may not be included in the scope of supply!

13. Disposal

The device is supplied in packaging to avoid transport
damages. This packaging is raw material and can
thus be used again or can be reintegrated into the
raw material cycle. The device and its accessories
are made of different materials, such as metals and
plastics. Take defective components to special waste
disposal sites. Check with your specialist dealer or
municipal administration!
Do not throw old equipment away with household
waste!
This symbol indicates that this product must
not be disposed of in household waste as per
Waste Electrical and Electronic Equipment di-
rective (2012/19/EU) and national laws. This product
must be handed over at the intended collection point.
This can be done, for example, by returning it when
purchasing a similar product or delivering it to an
authorised collection point for the recycling of old
electrical and electronic devices. Improper handling
of old devices can have negative effects on the en-
vironment and on human health due to potential haz-
ardous materials which are often contained in old
electrical and electronic devices. By disposing of this
product properly, you are also contributing to the ef-
fective use of natural resources. Information about
collection points for old devices can be found at your
municipal authority, the local disposal provider, an
authorised location for the disposal of old electrical
and electronic devices or your waste collection ser-
vice.
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58