Accessories; Disposal & Recycling - Scheppach AB1600 Translation Of Original Instruction Manual

m CAUTION! Switch off the device.
Disconnect the mains plug!
1. Unscrew the sight glass (7) using the
Allen wrench (b) and drain the oil.
2. To prevent uncontrolled drainage of
oil, place the container under the drain
plug and collect the oil in it.
Note: Waste oil must be disposed of
at the appropriate collection point for
used oil!
3. Fill the new oil has reached (about
30 ml) into the oil filler opening, until
the oil level has reached the specified
level.
4. Tighten the sight glass again.
5. Check the oil level again after a short
period
Service information
Please note that the following parts of
this product are subject to normal or nat-
ural wear and that the following parts are
therefore also required for use as con-
sumables.
Wear parts*: Chisel, carbon brushes
* Not necessarily included in the scope of
delivery!
46 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

14. Accessories

Flat chisel
item no.:
Point chisel
item no.:
15. Disposal & recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit.
The raw materials in this packaging can
be reused or recycled. The equipment and
its accessories are made of various types
of material, such as metal and plastic. De-
fective components must be disposed of
as special waste. Ask your dealer or your
local council.
Old devices must not be disposed of
with household waste!
This symbol indicates that this prod-
uct must not be disposed of together
with domestic waste in compliance
with the Directive (2012/19/EU) pertaining
to waste electrical and electronic equip-
ment (WEEE).
This product must be disposed of at a
designated collection point. This can oc-
cur, for example, by handing it in at an au-
thorised collecting point for the recycling
of waste electrical and electronic equip-
ment.
3908201108
3908201109