Draper 63669 Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Welding System
  5. 63669
  6. Manual

Draper 63669 Manual

Gasless mig welder
Hide thumbs
Table of Contents

Advertisement

Quick Links

GASLESS
MIG
WELDER
63669, 70050, 70051.
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Stock No.70050 shown

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 63669 and is the answer not in the manual?

Questions and answers

Related Manuals for Draper 63669

Summary of Contents for Draper 63669

  • Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
  • Page 2 INTRODUCTION Danger of ultraviolet radiation. 1.1 SCOPE This MIG welder is a limited duty machine designed to perform welding fabrication on a variety of steel types Danger of burning splashes. with flux cored filler wire. Intended for domestic and infrequent light trade use. Any application other than that it was intended for, is considered misuse.

  • Page 3: Specification

    2.1 SPECIFICATION Stock No............... 63669 Read all these instructions before attempting to operate this product and save these instructions. Part No.............. MIG100 Rated voltage ..........
  • Page 4 Fumes & Gases can be harmful: grinding, or when near cooling welds as metal filings or slag can be thrown up. Fully enclosed goggles are – The welding process generates hazardous fumes as advisable. a by-product. Inhalation of these fumes is hazardous to health.

  • Page 5: Unpacking And Checking

    Fig A. If any part is damaged regulations. or missing, please contact the Draper Help Line (see back page). Do not attempt to use the product! The packaging material should be retained during the warranty period, in case the product needs to be returned for repair.

  • Page 6: Technical Description

    TECHNICAL DESCRIPTION (12) (10) (11) (14) (13) (15) Stock No.70050 shown FIG.A (1) Transport handle. (10) MIG Spool hub. (2) MIG welding torch. (11) MIG wire feed assembly. (3) MIG wire feed speed. (12) Open catch. (4) Earth clamp. (13) Flux cored wire. (5) Max., Min.

  • Page 7: Assembling The Welder

    The welding wire is flux-cored types this provides a supply you intend to connect it to. means of shielding the weld pool from the atmosphere. Stock nos.63669 & 70051. Do not let the filler wire become uncoiled or tangled as These appliances are supplied with an approved plug this will lead to problems with delivery to the welding and cable for your safety.
  • Page 8 (ie. Material type, position, condition etc.) That information is well beyond the scope of this manual. (11.3) Draper Tools suggest training be obtained from a third party or refer to a suitable reference book on the subject additionally; nothing can beat practice using the welder FIG.
  • Page 9 8.5 MIG WELDING PRINCIPLES – the wire becoming blocked or restricted. FIGS. 6 – 7 Use of an anti-spatter spray (Draper Stock No.05709) will help keep the end result more tidy. The MIG welding process allows two similar materials to be fused together without altering the properties of the 8.6 DEFINITION:...

  • Page 10: Troubleshooting

    TROUBLESHOOTING 9.1 TROUBLESHOOTING WARNING: For your own safety, turn the switch off and remove the plug from the power supply socket. PROBLEM POSSIBLE CAUSE REQUIRED ACTION Dirty current nozzle (contact tip). Clean. Wire not feeding despite Wire feed pulley set too tight. Loosen.

  • Page 11: Warranty

    This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

This manual is also suitable for:

7005070051

Table of Contents