Draper 71095 Instructions Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Welding System
  5. 71095
  6. Instructions manual
Draper 71095 Instructions Manual

Draper 71095 Instructions Manual

Gas/gasless 160a mig welder
Hide thumbs Also See for 71095:
Table of Contents

Advertisement

Quick Links

Download this manual
GAS/GASLESS
160A MIG
WELDER
71095
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 71095 and is the answer not in the manual?

Questions and answers

Related Manuals for Draper 71095

Summary of Contents for Draper 71095

  • Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
  • Page 2 INTRODUCTION Danger of ultraviolet radiation. 1.1 SCOPE This MIG welder is a limited duty machine designed to perform ARC welding fabrication on a variety of steel Danger of burning splashes. types with either shield gas or flux cored filler wire. Suitable for enthusiasts and tradespersons alike.

  • Page 3: Specification

    2.1 SPECIFICATION – Do not leave the machine unattended and remove Stock No............... 71095 the plug from the socket when not in use. Part No............MW170T – Do not use welding cables unsuitable for the amperage.
  • Page 4 locked cabinet may not be safe. • ultra-violet radiation (can damage skin and eyes). • visible light (can dazzle eyes and impair vision). – Do not weld pressurised containers. • infra-red (heat) radiation (can damage skin and – Do not weld tanks, drums, or other vessels until they eyes).

  • Page 5: Unpacking And Checking

    Fig A. If any part is damaged regulations. or missing, please contact the Draper Help Line (see back page). Do not attempt to use the product! The packaging material should be retained during the warranty period, in case the product needs to be returned for repair.

  • Page 6: Technical Description

    TECHNICAL DESCRIPTION (14) (15) (16) (13) (5) (6) (12) (11) (10) (17) (12) (13) (18) FIG.A (1) Transport handle. (10) Earth clamp. (2) MIG gas hose barb. (11) Direct connection MIG torch. (3) Rear wheels. (12) Front castors. (13) Cover latch. (4) ON/OFF switch.

  • Page 7: Assembling The Welder

    ASSEMBLING THE then another circlip, repeat for other side. Fit the plastic caps. WELDER 7.4 INSTALLING THE FILLER WIRE Make sure the power supply information on the – FIGS. 1 - 4 machine’s rating plate is compatible with the power supply you intend to connect it to.
  • Page 8 FIG. information is well beyond the scope of this manual. Draper Tools suggest training be obtained from a third 9. Press the feed trigger on gun and observe the wire party or refer to a suitable reference book on the subject feed mechanism.
  • Page 9 8.5 MIG WELDING PRINCIPLES – FIGS. 7 – 8 The MIG welding process allows two similar materials to be fused together without altering the properties of the material. The electric arc created between the electrode (the welding wire) and the work piece produces the required heat for turning the metal into a molten state.

  • Page 10: Troubleshooting

    To increase the operation time, reduce the amperage. Use of an anti-spatter spray (Draper Stock No.05709) Note: The heating tests have been carried out at will help keep the end result more tidy. ambient temperature and the duty cycle (duty factor) at 20°C has been determined by simulation...

  • Page 11: Warranty

    This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period.

Table of Contents