Draper 69339 Instruction Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Welding System
  5. 69339
  6. Instruction manual

Draper 69339 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ARC WELDER
69339, 71090
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions
before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 69339 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper 69339

Summary of Contents for Draper 69339

  • Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Explanation Of Symbols

    INTRODUCTION Danger of ultraviolet radiation. 1.1 SCOPE This ARC welding machine is designed to weld ferrous Danger of burning splashes. metals such as steel and iron. This product is suitable for enthusiasts and tradespersons alike. Any application other than that it Fan cooled.

  • Page 3: Specification

    – Keep the working environment, equipment, cables, SPECIFICATION and clothing free from grease, oil, moisture, and dirt. 2.1 SPECIFICATION – Ensure the welding machine has been correctly earthed and all panels are fitted securely. Stock No............... 69939 – The operator must be insulated from the floor and Part No.
  • Page 4 wear protective clothing. that it has had time to cool sufficiently and is disconnected. – Sparks and molten metal can pass through gaps. Be aware that fire can start out of sight. Flammables in a – The arc generates: locked cabinet may not be safe. •...

  • Page 5: Unpacking And Checking

    Check contents against the parts shown in Fig A. If any part is damaged or missing, please contact the Draper Help Line (see back page). Do not attempt to use the product! TECHNICAL DESCRIPTION 5.1 PRODUCT IDENTIFICATION –...

  • Page 6: Assembling The Arc Welder

    ASSEMBLING THE Power supply identifier, e.g. European ARC WELDER socket with 3 conformity. poles. 6.1 CONNECTION TO THE POWER Denotes that SUPPLY the unit has the potential to be Secondary Make sure the power supply information on the product’s used safely in no-load environments rating plate is compatible with the power supply you...

  • Page 7: Operation

    3.0 – 4.0mm 105 – 140 welding publication and/or seek training on the subject. FIG. − Use of an anti-spatter spray – Draper stock No.05709 – will help to achieve a cleaner finished OPERATION weld. 8.1 BASIC MMA/ARC WELDING PROCESS OVERVIEW – FIG.2 During the MMA/ARC welding process, the arc created (9.1)

  • Page 8: Duty Cycle

    Required action No spark. Bad clamp connection. Check clamp connection. PCB on the inverter is defective Contact Draper Tools/authorised service or damaged. agent for repair/replacement. No output voltage. Overheated unit – the thermal Wait for unit to cool and the re-setting of cut-out LED will be illuminated.

  • Page 9: Maintenance

    − If the replacement of the supply cord is necessary, handling, alterations, accidents, or repairs attempted or this has to be done by Draper Tools or an authorised made by any personnel other than the authorised Draper service agent to avoid a safety hazard.
  • Page 10 11. DISPOSAL NOTES 11.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area.
  • Page 11 – 11 –...

This manual is also suitable for:

71090

Table of Contents