Draper 63669 Manual page 2

1. INTRODUCTION
1.1 SCOPE
This MIG welder is a limited duty machine designed to
perform welding fabrication on a variety of steel types
with flux cored filler wire.
Intended for domestic and infrequent light trade use.
Any application other than that it was intended for, is
considered misuse.
This product is not a toy and must not be used by
children or any person with reduced physical, sensory or
mental capabilities or lack of experience and knowledge,
or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
1.2 UNDERSTANDING THIS MANUALS
SAFETY CONTENT:
Warning! – Information that draws attention to the
risk of injury or death.
Caution! – Information that draws attention to the risk of
damage to the product or surroundings.
1.3 EXPLANATION OF SYMBOLS
Warning!
Read the instruction manual.
Warning!
Wear suitable welding eye/face protection.
Warning!
Wear ear defenders (During grinding
operations).
Warning!
Wear protective gloves.
Keep out of the reach of children.
Warning!
Danger of electric shock.
Danger of fire.
Danger of explosion.
Danger of fumes.
Danger of ultraviolet radiation.
Danger of burning splashes.
Pressure bottle to be secured by chain.
Fan cooled.
Power supply plug.
Input voltage.
Protection rating.
Thermal overload.
30-200A
MIG range.
MIG
MIG gasless welding.
MIG flux cored wire sizes.
Machine weight.
WEEE –
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic
Equipment in with domestic rubbish.
Do not incinerate or throw
onto fire.
For indoor use only.
Do not expose to rain.
– 2 –