Quick Setup; Installation - Aqara WSDCGQ11LM Manual

Quick Setup

1. Before activating the accessory, please make sure you
have the Aqara Home app downloaded and Aqara hub
installed.
2. Please open the app, tap "Home" and then tap "+" in the
top right corner to enter "Add Device (Accessory)" page.
Select "Temperature and Humidity Sensor", and add it
according to instructions.
* If the connection fails, please move the accessory closer to the
Hub and try again.

Installation

E ective Range Test: Single press the reset button on the
accessory at your desired position. If the Hub makes voice
prompts, it indicates that the accessory can
communicate e ectively with the Hub.
* Avoid metal surface to maximize signal strength.
Option 1: Place it directly in the desired position.