First Time Power-On - Dimplex BPH100M Instruction Manual

First Time Power-On

A setup wizard will display when the product is powered on for
the fi rst time. This will set the following:
• Time, Date, Daylight Savings Time
• Sound On/Off
For information on using the Heaters controls, refer to page 10.
The Heater will then take the User to the Home Screen with the
'Out All Day' Timer Mode active.
Operation Manual
WARNING: FAILURE TO FOLLOW THESE OPERATING INSTRUCTIONS MAY RESULT IN INJURY AND/OR DAMAGE.
The controls are located on top of the heater. This consists of a display screen and six touch sensitive buttons.
Display Screen
1
'Menu' Button
2
'Back' Button
3
4 'Up and Down' Arrows
5 'Enter' Button
6 'Advance' Button
7 Heating Status
The heater is fi tted with an adjustable thermostat enabling the room temperature to be controlled. The minimum
room temperature is 7°C. The maximum temperature is set to 30°C. A temperature of 21°C is a common comfortable
room temperature.
8
Important
During initial heat-up, some odour may be
emitted due to the newness of materials used in
manufacture. This is normal and will disappear
after a short period of use. It is however advisable
to keep the room well ventilated.
1 2
Out All Day
21 °
C
Heating On
7
6 4
3 5